10 Best Portable hf Transceiver of 2021

Top 10 Best Portable hf Transceiver: Editor Choice

The 10 Best Portable hf Transceiver Review:

1. XIEGU G1M Portable QRP HF Transceiver SDR Transceiver

XIEGU G1M Portable QRP HF Transceiver

Receiving capability 0.5-30 MHz general coverage and transmitting capabilities on four most popular amateur radio bands, the G1M is a highly portable QRP transceiver and has a clear and bright OLED screen.

NEW SDR Core Circuit – Based on 16 bit-CODEC sampling, G1M gains stable and excellent performance. Supports connection with PC, with 3.5mm socket, G1M can connect to a computer for data modes using aftermarket soundcards. Also, via new interfaces G1M can easily connect to the XPA125/XPA125B /XPA20 amplifiers.

OLED Display Vision – G1M comes with an OLED display screen that displays all status information, which provides high convenience of the user.

CW AM Receiving Mode – Compare with the old version, G1M added AM receiving mode, allowing to reach up more news from all over the world. With an 800Hz narrowband CW digital filter, filter out much pileup interferences when answering a call in CW contest.

Highlighted Features:

  • OLED Spectrum Display
  • AM Broadcast Receiving Mode
  • Adaptive Speech Noise Reduction Processing
  • HF Continuous Reception
  • Adjustable AGC Control

Package Included:

  • 1 x G1M HF Transceiver
  • 1 x Microphone
  • 1 x Coaxial Power Cable
  • 1 x English Manual
  • 1 x Certificate

Buy on Amazon

2. GRA-1899T multiband HF VHF

GRA-1899T multiband HF VHF

GRA-1899T Portable Telescopic HF Antennas were designed specifically for the popular Yaesu YAESU FT-817, FT-817ND, FT-818, FT-857D or KX3 Multimode HF/VHF/UHF Portable Transceiver.

These antennas cover all HF bands, including WARC bands, from 80 Meters to 6 Meters. They handle up to 25 Watts RF power. For our Ham Friends on other continents, these antennas also cover the 4 meter band!

They are fitted with a convenient BNC connector and are approximately 5 ft., 5 in. tall when fully extended. This makes it ideal for the FT-817 or other QRP transceiver.

Band changing is achieved by plugging the “wander lead” into the appropriate socket on the base coil, and then making fine tuning adjustments with the 10-section telescopic whip.

When the whip is collapsed and unscrewed from the matching coil, the entire antenna may be stored in a space only 12.6 in. long. This product is 100% Made in Taiwan.

Highlighted Features:

  • Designed specifically for the Yaesu YAESU FT-817, FT-817ND, FT-818, FT-857D, KX3 and other QRPrigs.
  • Cover all HF bands, including WARC bands, from 80 Meters to 6 Meters.
  • Band changing is achieved by plugging the “wander lead” into the appropriate socket on the base coil.
  • Making fine tuning adjustments with the 10-section telescopic whip.
  • Has BNC connector. Use adapter for SO-239.

Buy on Amazon

3. Yaesu Original FT-991A HF

Yaesu Original FT-991A HF

The FT-991A is the next-generation of the widely popular FT-991. Like its predecessor, the FT-991A is creatively designed to fit into a very compact (W9.0” xH3.2” x D9.3”) rugged case and will deliver up to 100 Watts solid output power (50 Watts on 140/430MHz) on SSB, CW, AM, FM, Packet and C4FM Digital on the popular HF/50/140/430MHz bands.

In keeping with the spirit of the rich performance of the FT-991, the new FT-991A provides two new stimulating and useful advanced features – a Real-time Spectrum Scope and a Multi-Color Waterfall Display.

See also  10 Best Summer Sausage Review of 2021

The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio allowing them to quickly move to the desired signal.

The strength of signals on the band can readily be seen on the Multi-color waterfall display. Chronological order color differentiation allows operators to easily recognize weak signals at a glance; signals that might otherwise be missed on the spectrum scope.

These additional exciting functions enable more efficient and satisfying operating time while making important contacts on the crowded HF and 6 meter bands.

We believe that the new FT-991A will be widely accepted as an ideal field gear rig by the majority of the ham radio operators who want to enjoy reliable and flawless communication on all the HF and V/UHF bands with just one radio.

Highlighted Features:

  • Dynamic Real-Time Spectrum Scope *NEW!
  • Multi-Color Waterfall Display *NEW!
  • 160 Meters through 70 Centimeters – SSB/CW/FM/C4FM Digital/AM
  • 100 Watts (2 Meter / 70 Centimeter: 50 Watts) of Solid Output Power Performance
  • 3.5 inch TFT Full-Color Touch Panel Operation for Superior Operability and Visibility

Buy on Amazon

4. Icom IC-705 HF/VHF/UHF All Mode Portable QRP 5W/10W Transceiver

Icom IC-705 HF/VHF/UHF

From HF to 50/144/430 MHz, enjoy a variety of bands in D-STAR DV, SSB, CW, AM and FM modes. The IC-705 receives continuously from the medium wave broadcast band to 144 MHz band. You can also enjoy FM broadcast and air band reception.

The IC-705 uses the RF direct sampling method, which greatly reduces distortion. The high speed/high resolution real-time spectrum scope and waterfall display are incorporated in a compact design for the first time in this class.

Users familiar with the real-time spectrum scope and waterfall display as seen in the IC-7300 and IC-9700 can now use it in field operation. Utilize the base station feature without the price of one in a compact radio, quickly monitor band activity and find a clear frequency.

Users can enjoy the latest G3 Gateway and DV mode features and have direct access to the D-STAR network with Terminal/Access point modes. The Photo Share feature as seen in the IC-9700 is available on the IC-705 to share photos with other IC-705 and IC-9700 radios without a computer.

Enhance field operations with the built-in GPS receiver and antenna. Functions include location logging*, RX/TX locations via D-PRS, “Near Me” repeater search/scan, QSO recording with metadata*, and an internal clock synchronization.

Highlighted Features:

  • Output Power: 10W with 13.8VDC external power supply, 5W with BP-272 li-ion battery pack
  • Receiver: 0.030–199.999, 400.000–470.000
  • Transmitter: 1.800–1.999, 3.500–3.999, 5.255–5.405, 7.000–7.300, 10.100–10.150, 14.000–14.350, 18.068–18.168, 21.000–21.450, 24.890–24.990, 28.000–29.700, 50.000–54.000, 144.000–148.000, 430.000–450.000
  • The large 4.3-inch touch screen color improves visibility and operability in the field.
  • Built-in Bluetooth and wireless LAN; use for smartphone linking and remote control

Buy on Amazon

5. Yaesu FT-818ND FT-818 6W HF/VHF/UHF All Mode Mobile Transceiver

Yaesu FT-818ND FT-818 6W HF

The new Yaesu FT-818 incorporates all of the basic and attractive features of the ever-popular FT-817ND while providing upgrades desired by many existing owners.

The FT-818 provides 6W of solid output power with an external DC power source. The supplied Ni-MH battery pack (SBR-32MH) has been upgraded to now provide larger battery capacity – 9.6v/ 1900mAh.

The recent launch of several new satellites is a certain indicator that the large global community of satellite enthusiast are going to be very delighted to learn that the FT-818 includes a Built-in TCXO-9 oscillator that gives the FT-818 fantastic frequency stability (±0.5ppm).

The FT-818 includes all the useful functions that are included in the FT-817ND: Dual VFOs; Split-Frequency operation; IF Shift; Clarifier “R.I.T”; IF Noise Blanker; RF Gain and Squelch control; IPO (Intercept Point Optimization);

See also  10 Best Guitar Knobs Review of 2021

AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic Keyer; Adjustable CW Pitch; Automatic Repeater Shift (ARS);

Built-in CTCSS Encoder/ Decoders; 208 memory channels with 10 memory groups; two antenna connectors; Automatic Power-Off (APO) and Time-Out-Timer(TOT) functions; and so on.

Highlighted Features:

  • RX: 100 kHz – 33 MHz; 33 MHz – 56 MHz; 76 MHz – 108 MHz; 108 MHz – 154 MHz; 420 MHz – 470 MHz
  • TX: 1.8 MHz – 29.7 MHz (5.3320 MHz/ 5.3480 MHz/ 5.3585 MHz/ 5.3730 MHz/ 5.4050MHz); 50 MHz – 54 MHz; 144 MHz – 148 MHz; 430 MHz – 450 MHz (Amateur Bands only)
  • Increased power output 6W(SSB, CW, FM) 2.0W(AM Carrier)
  • Improved frequency stability ±0.5 ppm : Built-in TCXO-9
  • Larger battery capacity : 9.6V/1,900mAh (SBR-32)

Buy on Amazon

6. HYS Ham HF Amplify Power 3-30MHz HF Transceiver

No products found.

The most effective working frequency is 20-30 MHz, and with the situations of working under 20 MHz, the v.s.w.r will be higher and also the heat dissipation will be higher.

About the working general output for AM & FM mode is around 100W and the most effective output is around 200 W with input 5 W and around 200-250 when the input is 10W.

The frequency of the connecting antenna is very significant. It is also should be connect with the amplifier corresponding frequency. If it is lower or higher than the required, it will not work and even will not only burn out the amplifier but also will damage the radio.

If you want to reach the PE MAX output, please check that the input should exactly 10W or 5W, the DC Power should actually be over 14V and 18A and also other conditions should be perfecT. Different mode have the different input requirement.

However, we do not suggest to work the PE Max for a long time. It will decrease the amp’ life time and also if the antenna can not endure the output watt, which will damage the amp, thank you very much!

Highlighted Features:

  • Frequency range HF(3-30Mhz)
  • Operate voltage:12-14 Vcc
  • Input current/POWER:14-20 A
  • Input power:1-5 W
  • SSB input power:2-10 W
  • FM Output power: Max 150 W(Input 10W)
  • AM Output power: Max 150 W(Input 10W)
  • SSB output power: Max 300 W(Input 10W), Max 250W (Input 5W )
  • Working mode: FM- AM-CW-SSB
  • Blown fuse:2×12 A
  • Dimension:109x225x35 mm

No products found.

7. Xiegu G90 SDR HF Transceiver

Xiegu G90 SDR HF Transceiver

Every G90 comes with a detachable faceplate/display head. This removable display is excellent for when you’re installing it in your Ham Shack, vehicle, or taking it backpacking.

If you’re a fan of AnyTone radio screens, then you’re going to love this screen. The front plate has a 1.8-inch high brightness TFT LCD screen display. This screen is teaming with features, including your mode, channels, filter, and signal strength.

What I like most about this is the waterfall feature. This waterfall gives you a quality visual look at your signal strength. Overall the display is sharp, offering a lot of exciting features that are easy to read.

For the size of this system, you don’t give up much power. You’ll have up to 20W of RF Power, which is cool for this transceiver’s size.

You’ll also have an automatic antenna tuner to improve the power transfer between G90 and the antenna. So no fussing with having to tune your antenna.

Highlighted Features:

  • All-Mode, All band HF Radio Easy to use all functions from the front panel
  • Front End Narrowband ESC Preselector
  • Frequency Range of 0.5-30MHz, SSB/CW/AM
  • 1.8-inch high brightness color TFT LCD screen
  • ±24k Bandwidth Spectrum Display with Waterfall showing the spectrum
  • Software-Defined Narrowband Filter (CW mode: 300Hz)
  • Detachable Front Panel/Display Unit
  • Up to 20W of RF Power
  • Built-in Wide Range Automatic Antenna Tuner
  • I/Q Output for Interfacing with a PC or XDT1 Pan adapter

Buy on Amazon

See also  10 Best 5 Gum Flavor of 2021 - Reviews By An Expert!

8. Yaesu FT-818 Radio and Accessory Bundle

Xiegu G90 SDR HF Transceiver

Tired of looking at all of the parts, trying to figure out what works together? We’ve been there at one point, so we figured we would make it easier for you! Whether you’re a new ham looking to get on the air for the first time or an experience ham, these kits make it easy to get everything you need! Get on the air now with our pre-bundled kits!

  • Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
  • LDG Z-817 Automatic Antenna Tuner
  • Ham Guides TM Quick Reference Card

The new Yaesu FT-818 incorporates all of the basic and attractive features of the ever-popular FT-817ND while providing upgrades desired by many existing owners.

The FT-818 provides 6W of solid output power with an external DC power source. The supplied Ni-MH battery pack (SBR-32MH) has been upgraded to now provide larger battery capacity – 9.6v/ 1900mAh.

The recent launch of several new satellites is a certain indicator that the large global community of satellite enthusiast are going to be very delighted to learn that the FT-818 includes a Built-in TCXO-9 oscillator that gives the FT-818 fantastic frequency stability (±0.5ppm).

The FT-818 includes all the useful functions that are included in the FT-817ND: Dual VFOs; Split-Frequency operation; IF Shift; Clarifier “R.I.T”; IF Noise Blanker; RF Gain and Squelch control; IPO (Intercept Point Optimization);

AM Aircraft reception; AM and FM Broadcast reception; VOX; Built-in Electronic Keyer; Adjustable CW Pitch; Automatic Repeater Shift (ARS); Built-in CTCSS Encoder/ Decoders; 208 memory channels with 10 memory groups; two antenna connectors;

Automatic Power-Off (APO) and Time-Out-Timer(TOT) functions; and so on. The FT-818 must have the batteries in when using the adapter.

Highlighted Features:

  • Bundle Includes:
  • Yaesu FT-818 HF/VHF/UHF All-Mode Portable QRP Transceiver
  • LDG Z-817 Automatic Antenna Tuner
  • Ham Guides TM Quick Reference Card

Buy on Amazon

9. Transceiver and Ham Guides TM Quick Reference Card

Xiegu G90 SDR HF Transceiver

The Yaesu FT-991A is the successor to the extremely popular FT-991. The FT-991A is an all mode, all band MF/HF/VHF/UHF transceiver that includes C4FM (System Fusion) Digital Capability.

The FT-991A operates on CW, AM, FM, SSB, and supports digital modes (Packet, PSK31, RTTY and C4FM). The FT991A provides 100 Watts of output power on HF and 50 Watts on VHF/UHF while pulling a maximum of 23A at 100W.

The FT-991A includes a new dynamic real-time spectrum scope that gives radio operators the ability to graphically view the location of signals on the band and can be easily seen on the 3.5inch multi-color waterfall display.

The 3.5 inch full color TFT touchscreen display provides superior operability and visibility for the new spectrum scope feature. A state of the art 32-bit digital signal processing system, internal automatic tuner, high accuracy TXCO and 3kHz roofing filter are included in the FT991A.

The Yaesu FT991A is compact, lightweight and portable, weighing in at just 9.7lbs. In the box with the FT-991A, you’ll find a MH-31A8J hand microphone, DC Power Cord, 25A Spare Fuse and a Operating Manual / Warranty Card. The Yaesu FT-991A has a 3 year warranty.

Highlighted Features:

  • Yaesu FT-991A HF/VHF/UHF All-Mode Transceiver
  • Ham Guides TM Quick Reference Card

Buy on Amazon

10. Bundle – 2 Items – Icom IC-7300 HF/50 MHz

Xiegu G90 SDR HF Transceiver

New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio.

The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the 7300 will far exceed your expectations for a radio considered entry level.

Highlighted Features:

  • ICOM IC-7300 100W HF Transceiver
  • Ham Guides TM Pocket Reference Card

Buy on Amazon

Leave a Comment